Modulate Signals from Two Video Devices to Any Two Channels You Select

Sends audio/video signals to any TV

Modulates signals from two video sources to two user-selected channels

Capable of remotely controlling two video devices using IR accessories

Internal quartz crystal reference oscillators and PLL circuitry for drift-free performanceThe Channel Plus Two Channel Digital IR Modulator converts audio/video input signals from any two of your video devices (VCR, DVD player, satellite, or security camera) to two user-selected channels (UHF or CATV). Just select the channels you want to modulate to using the "program" button on the front¡ªnow you can tune-in to those channels to watch what's playing on your video devices. If you are watching a TV in another room, running back to the VCR or DVD player (to pause the movie), or satellite receiver (to change the channel) can be difficult and inconvenient. The two channel IR modulator has an integrated IR control engine that lets you remotely control your video devices. , , , , , , and "Y adaptor sold separately.

Details and Specifications
The Channel Plus Two Channel Digital IR Modulator converts up to two baseband video/audio input signals to any two user-selected UHF or Ultraband CATV channels. Select the Channel A or Channel B modulator using the "select" button, then choose the output frequency (UHF: 14¨C64; CATV: 65¨C125, excluding 95¨C99) using the "program" button. Any TV connected to the outputs via coax can receive the signals when the TV is tuned to either of the modulated channels. The two channel IR modulator has an integrated IR control engine with two IR repeater jacks, giving the ability to remotely control a video distribution panel (amplifier) without the need to run a powerline to the panel. With the addition of an IR wall plate with an attached IR sensor (emitter), you'll be able to send remote signals back to the two channel digital IR modulator over coax cable. The two channel IR modulator works with both 12-volt and 5-volt IR systems and accessories. The IR modulator also has two 75 ohm termination jumpers to loop-through the video and audio signals.

Specifications

Channel Plus Product #
5525

Dimensions
height: 1.5" (3.8cm)
width: 7.97" (20.2cm)
depth: 5.54" (14.1cm)

Weight
2 lbs. (0.91kg)

Power
transformer input: 105¨C125 VAC
transformer output: 15 VDC, 600mA

Signal Inputs
two (2) video inputs
(left & right combined for monaural)

Signal Outputs
one (1) RF output
two (2) IR ouput repeaters

Frequency Ranges
UHF: 14¨C64
CATV: 65¨C125 (excludes 95¨C99)

Warranty
one year

What's Included

Channel Plus Two Channel Digital IR Modulator base
15 VDC AC adaptor cord
Channel Plus Two Channel Digital IR Modulator User Manual
four (4) sticky nonslip feet
Four (4) mounting holes