Voltek Voltek Wired Professional Colour PIR Camera (1877) With VCR Activator camera specif

Voltek Wired Professional Colour PIR Camera (1877) With VCR Activator ¡ê209.95 (inc VAT and FREE delivery)

Record to your VCR when motion is detected

The Video Activator
When the camera PIR detects movement it sends an alarm signal to the receiver which in turn triggers the Video Activator. This is done by an infra-red link, exactly as your remote control works.

You can set how long the VCR will record for after the last movement was detected. Also included is an audio alarm when recording commences to warn you of motion detection.

Simple push buttons and LED indicators allow full control and use. An Enable/Disable button allows the unit to be easily enabled and ready to record. It has been pre-programmed with virtually every make of video recorder infra-red commands for easy setting up. Memory back-up prevents the need for re-programming in the event of a power loss.

Extend your CCTV system

To add more cameras to this system you will need to also purchase a 4 Way switcher for ?9.95 which will allow your VCR to switch to whichever camera is triggered by the motion detector.

Add More Cameras

You can add B&W or Colour cameras to this system
Voltek Wired Professional Night Vision B&W PIR Camera for only ?24.95 to complete your 4 camera security System. Or the Voltek Additional Wired Professional Colour PIR Camera for ?49.95

Time and Date Generator

If you would like to add the Time and Date Generator to your motion activated recordings, simply add the Time and Date Generator for ?9.95

Extend Your Night Vision Range

With the Infra Red Illuminator you can extend your night vision range to up to 10 metres for only ?4.95. Ideal for outdoor or indoor use. Works with all our B&W night vision cameras.

See all Voltek products

To view brands of VCR that are compatible with the VCR controller HERE