|
||
Voltek x 3 Wireless Indoor/Outdoor Colour PIR Cameras (CA250) and Receivers With VCR Activator ¡ê359.95 (inc VAT and FREE delivery)
Record to your VCR when motion is detected. From three colour cameras!
x 3 colour PIR cameras Built in microphone for crystal clear sound VCR activation when motion is detected - 5m zone PIR detection Camera is fully portable ?mains or battery powered Auto-scan with adjustable dwell time of 2-30 seconds on each camera Camera transmits wirelessly up to 70 metres line of sight or up to 30 metres through walls etc Very easy and quick to set up and use. No expensive installation or unsightly wires
This system is perfect for home security, shop security and all other movement detection monitoring requirements. The Wireless PIR Camera The Colour PIR (movement detection) weatherproof wireless cameras provide you with a fantastically clear picture of what is going on. The cameras are capable of detecting movement up to 5 metres away over a 90 degree angle. When movement is detected, the camera transmits clear colour video to the receiver which triggers the video activator to start your video recorder recording. The built-in microphone allows you to hear everything perfectly as well. The camera has an integrated stand for desktop positioning or can be mounted on the wall. Extend the length of the mains power cable by fitting a 5m Extension Lead Receiver The receiver allows you to view up to 3 cameras individually or you can set to auto-scan with adjustable dwell times of 2-30 seconds on each camera. If motion is detected by an individual camera it will dwell on that camera. You can buy as many additional receivers as you require to view motion detected events on additional televisions. Wireless Transmission The cameras transmit crystal clear colour video and sound on the 2.4 Ghz frequency to the Receiver. No wires, no installation, no hassle! The cameras transmit wirelessly up to 70 metres line of sight or up to 30 metres through walls etc. The Video Activator You can set how long the VCR will record for after the last movement was detected. Also included is an audio alarm when recording commences to warn you of motion detection. Simple push buttons and LED indicators allow full control and use. An Enable/Disable button allows the unit to be easily enabled and ready to record. It has been pre-programmed with virtually every make of video recorder infra-red commands for easy setting up. Memory back-up prevents the need for re-programming in the event of a power loss. Time and Date Generator If you would like to add the Time and Date Generator to your motion activated recordings, simply add the Time and Date Generator for ?9.95 CCTV Warning Sign Add a CCTV Warning Sign to your purchase to provide additional deterrent. To view brands of VCR that are compatible with the VCR controller
|
||
|