Clover CM625 B/W Ultra Miniature Camera with Standard Lens
 
List Price: $43.99

Our Price: $37.09

You Save: $6.90 (16%)

 

Product Description

Quality is always first at Clover Electronics. At Clover Electronics, everyone is a part of a team, where "Together Everyone Achieves More" and service is never compromised.PRODUCT FEATURES:B/W Ultra Miniature Camera with standard lens;Easy "Plug & Play" Connections;High Resolution;Low Power Consumption;VCR Recordable.

The Clover CM625 B/W Ultra Miniature Camera with Standard Lens is the fast, simple and extremely discreet CCTV video surveillance solution you've been looking for. This unit provides high-quality images that are VCR-recordable, to allow users to remotely monitor warehouses, construction sites, parking lots, office buildings and more. Easy to install, the CM625 is designed for primarily indoor use, but can be used in well-protected outdoor environments.

This camera utilizes a 0.33-inch black-and-white CCD (charge-coupled device) sensor, with a resolution of 512-by-492 pixels or 380 TVL (TV lines). The CM625 includes a 3.6mm lens, and has a usable minimum illumination down to 0.1 Lux. The unit's exposure times range from 1/60 to 1/100,000 of a second, ensuring a high picture quality. This camera can provide a frame rate of up to 30 frames-per-second (frames per second), equivalent to a 460-NTSC analog video. Powered via a 12-volt external DC power supply (included), the CM625 camera can operate in temperatures from -10 to 50-degrees Celsius.

Technical Features:

  • Sensitivity: down to 0.1 Lux
  • Frame rate: up to 30 frames per second
  • Resolution: up to 512 by 492 pixels or 380 TVL
  • Operating temperature: -10 to 50 degrees Celsius
  • Dimensions: approximately 2.5 x 3 x 2.5 centimeters (W x D x H)
Overall, the Clover CM625 provides you with a reliable, easy-to-use and unobtrusive camera that can complement most any monitoring system. Quick and easy to install, this incredibly compact camera comes completely assembled and ready to use, includes plug-and-play connections to ensure you get up and running as quickly as possible, and has a low power consumption to minimize the drain on your network. Users should note, however, that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light.

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

Features:
  • 0.33-inch black and white CCD sensor
  • Image resolution of 512 by 492 pixels
  • Video resolution of 380 TV lines
  • Light sensitivity allows camera to receive at minimum illumination of 0.1 Lux
  • Easy plug-and-play connections and low power consumption
Customer Reviews:
  • Excellent low light vision camera
    Of my several security cameras that I have securing the perimeter of my house, one is a Clover B/W and other three are different other brands.
    All of them do fine during daylight but during the night the Clover is the only one which can still 'see' while others go blind. A 60-watt light bulb on my motion sensor gives the Clover enough light to convey a clear and excellent picture to my recorder. One of my other cameras was sprayed on during one night, so now I have the Clover 'protecting' this other camera from its hidden location during the night. Strongly recommended....more info