Clover DQ-200 B/W Dome Quad Camera with Quad Splitter
List Price: $319.99

Our Price: $319.99

You Save:


Product Description

The Clover DQ-200 B/W Dome Quad Camera with Quad Splitter is an easy-to-use multiple-camera surveillance system that can be mounted almost anywhere. It allows users to remotely monitor warehouses, construction sites, schools, parking lots, office buildings and more. The dome is shatter-resistant so you can install your camera in more trying environments, and is easy to install with plug-and-play connections that work with most standard TVs and monitors. Designed as an economical alternative to quad-monitor systems with multiple cameras, the DQ-200 is designed for primarily indoor use, but can be used in protected outdoor environments as well. Ideal for budget-minded security systems, the DQ-200 can cover all views of an area cost-effectively.

This camera utilizes a 0.25-inch color CCD (charge-coupled device) sensor, with a resolution of 512-by-492 pixels or 380 TVL (TV lines). The DQ-200's four cameras each operate with a minimum illumination down to three Lux and a better-than 46 dB S/N (signal to noise) ratio. The unit's exposure times range from 1/60 to 1/100,000 of a second, ensuring a high picture quality. The DQ-200's cameras can provide a frame rate of up to 30 frames-per-second (frames per second), require no special monitor, and come with an IR (infrared) remote controller. The four DQ-200 cameras are powered via an 18-volt external DC power supply, while the IR receiver for the remote is powered by 12-volts of DC power. This unit can operate in temperatures from -10 to 50-degrees Celsius.

Technical Features:

  • Sensitivity: down to 3 Lux
  • Frame rate: up to 30 frames per second
  • Resolution: up to 512 by 492 pixels or 380 TVL
  • Operating temperature: -10 to 50 degrees Celsius
  • Dimensions: approximately 16.5 x 10.5 x 16.5 centimeters (W x D x H)
The Clover DQ-200 provides you with a reliable, cost-effective and easy-to-use surveillance system. The tamper-resistant dome housing makes the DQ-200 a powerful addition to any security system. Quick and easy to install, this camera comes completely assembled and ready to use. The included IR controller enables the user to set the dwell time, Quad, Auto and Manual modes remotely. Users should note, however, that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light.

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

About Pan/Tilt Cameras
A Pan/Tilt Camera has the ability to pan ("move" horizontally), or tilt ("move" vertically). IP cameras often have pan/tilt capability. A pan/tilt camera is ideal for monitoring of situations that need a continual real-time adjustment of the views.

About Dome Cameras
A dome camera is one of the most common indoor security camera styles. Mounted on the ceiling, and often built to be tamper-resistant, dome cameras are designed to be visually appealing and more secure than other types of security cameras. A true dome camera enables a continuous 360-degree pan and 90-degree tilt operation, providing for extensive room coverage. One disadvantage of dome cameras is that they usually are not suitable for low-light conditions and must be used in well-lit areas.

CLOVER DQ200 Dome Quad Camera for Ceiling Mount (BandW) 4 BandW cameras and a built-in, ;real-time quad splitter ; 60-ft cable and regulated power adapter ; Quad, sequential and manual mode ;selected by wired remote ; 380 lines of resolution ; Includes remote ; 2-year warranty Dome Quad Camera for Ceiling Mount (BandW)

  • 0.25-inch color CCD sensor
  • Includes four cameras and a quad-splitter in shatter-resistant dome
  • Image resolution of 512 by 492 pixels and video resolution of 380 TV lines at 30 fps
  • Light sensitivity allows camera to receive at minimum illumination of 3 Lux
  • Compatible with most TVs and monitors