ELK Magic Module Programmable Controller ELK-MM220
List Price: $44.95

Our Price: $44.95

You Save:


Product Description

The Magic Module ELK-MM220 is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc. The MM220 comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory). The ELK Starter Kit (ELK-MK400) contains components and software needed for programming. Features: 4 general purpose Counters, range 0 to 255 counts, 4 general purpose Timers, range 1/10 second to over 255 hours, Surface Mount ABS Enclosure with Snap-On Cover, Lifetime Limited Warranty. Specifications: Inputs: 2 Digital inputs, Jumper programmable for +12v or pull to ground input level. 0 to 2 volts is low, 2 to 15 is Hi. Outputs: 2 Form "C" Relays, 12 Amps @ 120VAC or 28VDC; One relay output may be configured as open collector transistor output - 100 ma. Max. Operating Voltage: 9.5-15 Volts DC. Current Draw: 10 ma. Nominal, 70 ma. Maximum with both relays active. Enclosure: Black ABS Plastic: 4.5" x 3" x 1.2"

  • Two Digital Inputs
  • Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)
  • 4096 program bytes using SIMPLE programming language
  • Program stored in non-volatile EEProm memory